ASTM A333 pipe and its usage
ASTM A333 is the Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service.
ASTM A333 standard covers wall seamless and welded carbon and alloy steel pipe intended for use at low temperatures. ASTM A333 alloy pipe shall be made by the seamless or welding process with the addition of no filler metal in the welding operation.
All seamless and welded pipes shall be treated to control their microstructure. Tensile tests, impact tests, hydrostatic tests, and nondestructive electric tests shall be made in accordance to specified requirements.
ASTM A333—— Seamless and Welded Steel Pipe for Low-Temperature Service
Application: Seamless and Welded Steel Pipe for Low-Temperature Service.
Production Standard, Grade, Steel No:
- ASTM A333 Grade 1 Seamless Pipe
- ASTM A333 Grade 3 Seamless Pipe
- ASTM A333 Grade 4 Seamless Pipe
- ASTM A333 Grade 6 Seamless Pipe stocks
- ASTM A333 Grade 7 Seamless Pipe
- ASTM A333 Grade 9 Seamless Pipe
- ASTM A333 Grade 10 Seamless steel Pipe
Strike temperature condition：
| Crade | The lowest temperature for strike test | |
| ℉ | ℃ | |
| ASTM A333 Grade 1 | -50 | -45 |
| ASTM A333 Grade 3 | -150 | -100 |
| ASTM A333 Grade 4 | -150 | -100 |
| ASTM A333 Grade 6 | -50 | -45 |
| ASTM A333 Grade 7 | -100 | -75 |
| ASTM A333 Grade 8 | -320 | -195 |
| ASTM A333 Grade 9 | -100 | -75 |
| ASTM A333 Grade 10 | -75 | -60 |
Mechan
| Standard | Grade | Tensile Strength (MPa） | Yield Point (MPa) | Elongation (%) | |
| Y | X | ||||
| ASTM A333 | Grade 1 | ≥380 | ≥205 | ≥35 | ≥25 |
| Grade 3 | ≥450 | ≥240 | ≥30 | ≥20 | |
| Grade 4 | ≥415 | ≥240 | ≥30 | ≥16.5 | |
| Grade 6 | ≥415 | ≥240 | ≥30 | ≥16.5 | |
| Grade 7 | ≥450 | ≥240 | ≥30 | ≥22 | |
| Grade 8 | ≥690 | ≥515 | ≥22 | ||
| Grade 9 | ≥435 | ≥315 | ≥28 | ||
| Grade 10 | ≥550 | ≥450 | ≥22 | ||
| Grade 11 | ≥450 | ≥240 | ≥18 | ||
ical requiremnts of ASTM A333 alloy pipe
Delivery Condition: Normalized and Tempered
Inspections and Tests Performed: Chemical Composition Inspection, Mechanical Properties Test(Tensile Strength,Yield Strength, Elongation, Flaring, Flattening, Bending, Hardness, Impact Test), Surface and Dimension Test, No-destructive Test, Hydrostatic Test.
Surface treatment: Oil-dip, Varnish, Passivation, Phosphating, Shot Blasting
Inner packing: Caps on two ends of every pipe
Package: bare packing/bundle packing/wooden carton packing.
Inspections and Tests Performed: Chemical Composition Inspection, Mechanical Properties Test(Tensile Strength,Yield Strength, Elongation, Flaring, Flattening, Bending, Hardness, Impact Test), Surface and Dimension Test, No-destructive Test, Hydrostatic Test.
Surface treatment: Oil-dip, Varnish, Passivation, Phosphating, Shot Blasting
Inner packing: Caps on two ends of every pipe
Package: bare packing/bundle packing/wooden carton packing.
